The Key Elements of Great

How to Find Hidden Piping and Valves

Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. Finding hidden water as well as gas piping valves is something that you need to look into and know where they are especially if you have to deal with things like emergencies. Below are some of the ways that you can be able to find out where the various valves are located.

If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.

There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. Such gas systems usually have the shutoff valve near the water heater or the furnace.

When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.

Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.

With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. For such valves using a metal detector may come in handy since they are usually metallic in nature. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.